Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
PK 17500T High Performance
The T models have been developed specifically for the varied requirements of breakdown and recovery services. They are impressive by virtue of detailed solutions such as the laterally arranged extension cylinders which guarantee a low overall height of the vehicle when the main boom is extended. A second control panel enables a perfect view of the platform. The radio remote control and electronic HPLS fitted as standard on the PK 15500T EH/PK 19500T EH also make day-to-day assignments easier.
Brochures
PK 13500T / PK 15500T EH / PK 17500T / PK 19500T EH
| Max. lifting moment | 15.6 |
| Max. lifting capacity | 7300 |
| Max. hydraulic outreach | 10.0 |
| Slewing angle | 420° |
| Slewing torque | 2.5 |
| Max. operating pressure | 320 |
| Pump capacity | 40 - 50 l/min |
| Dead weight (std.) | 1562 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B | 15.5 mt | 8.0 m | 420 | 2.5 | 32.0 Mpa | 40-50 | 1560 kg | 2280 mm | 2530 mm | 770 mm | 7965 mm | 7300 kg | 1940 kg |
| C | 14.5 mt | 10.0 m | 420 | 2.5 | 32.0 Mpa | 40-50 | 1680 kg | 2280 mm | 2550 mm | 800 mm | 10015 mm | 7300 kg | 1460 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
